Carpentry MCQ Questions and Answers Quiz

31. Dowel centers are

  1. small metal pins used for marking.
  2. the wooden cores of dowel rods.
  3. pieces of dowel rod used to strengthen joints.
  4. none of the above.

32. During sanding, the movement of the abrasive against the wood generates

  1. static electricity.
  2. adhesion.
  3. friction.
  4. tension.

33. Employers appreciate workers who

  1. have a positive attitude.
  2. can accept criticism.
  3. cooperate.
  4. all of the above.

34. Flat cutting produces a

  1. flat grain.
  2. irregular grain.
  3. patterned grain.
  4. cathedral grain.

35. Hand tools used to cut a mortise include a drill and a

  1. chisel.
  2. dado cutter.
  3. miter box.
  4. all of the above.

36. Hand tools used to cut a tenon include a backsaw or

  1. fine crosscut saw.
  2. table saw.
  3. dovetail saw.
  4. ripsaw.

37. If a chemical splashes into someones eye, the person should rinse the eye with

  1. alcohol.
  2. a gentle stream of cool water.
  3. mercurochrome.
  4. cold tea.

38. If the pattern for your workpiece includes loose curves, choose a.............blade.

  1. thin, narrow
  2. long
  3. wide, thick
  4. saber

39. In a dado joint, a(n).................across one board receives the end of another board.

  1. L-shaped cut
  2. dado
  3. groove
  4. lap

40. In cutting curves

  1. apply even, forward pressure.
  2. guide the work with your right hand.
  3. make relief cuts to within 1/4 inch of the layout line.
  4. all of the above.
Tags

MCQ Multiple Choice Questions and Answers on Carpentry

Carpentry Trivia Questions and Answers PDF

Carpentry Question and Answer

Spreading Knowledge Across the World

USA - United States of America  Canada  United Kingdom  Australia  New Zealand  South America  Brazil  Portugal  Netherland  South Africa  Ethiopia  Zambia  Singapore  Malaysia  India  China  UAE - Saudi Arabia  Qatar  Oman  Kuwait  Bahrain  Dubai  Israil  England  Scotland  Norway  Ireland  Denmark  France  Spain  Poland  and many more....