Power Electronics MCQ Questions and Answers Quiz

41. Single phase VSI are mainly used in

  1. Ups
  2. Multilevel configuration
  3. Power supplies
  4. All of these

42. The advantage of using free - wheeling diode in half controlled bridge converter is that

  1. There is always a path for the ac current independent of the ac line
  2. There is always a path for the dc current dependent of the ac line
  3. There is always a path for the dc current independent of the ac line
  4. There is always a path for the ac current independent of the ac line

43. The conduction losses in IGBT is

  1. Lower than that of MOSFET
  2. Equal to that of MOSFET
  3. More than that of MOSFET
  4. Equal to that of BJT

44. The device that does not have the gate terminal is ............................

  1. FET
  2. SCR
  3. Triac
  4. Diac

45. The device that exhibits negative resistance region is .........................

  1. Triac
  2. Transistor
  3. Diac
  4. UJT

46. The effects of EMI can be reduced by

  1. Reducing the efficiency of the coupling path
  2. Reducing the susceptibility of the receptor
  3. Suppressing emissions
  4. All of these

47. The input current waveform of a bridge controlled rectifier when the load is perfectly filtered is

  1. Square wave
  2. Saw - tooth wave
  3. Sine wave
  4. Trapezoidal wave

48. The most suited gate pulses given to the AC regulator with R - L load can be in the form of

  1. Large isolating pulse transformer
  2. A train of pulses
  3. Continuous signal
  4. None of these

49. The normal way to turn on a diac is by ...........................

  1. Gate voltage
  2. Breakover voltage
  3. Gate current
  4. None of the above

50. The output power of the cascaded amplifier-attenuator system can be determined using

  1. Actual gain of amplifier and attenuator
  2. Gain in dB of amplifier and attenuator
  3. Actual gain of amplifier
  4. Actual gain of attenuator
Tags

MCQ Multiple Choice Questions and Answers on Power Electronics

Power Electronics Question and Answer